 |
Description : Unit Per Pc. |
| 7301XX - Elbows , 45'' Malleable Cast Iron |
 |
Description : The thread size is the same for male and female pieces . |
| 7301XX - Street Elbows , Male & Female 45 '' |
 |
Description : Unit Per Pc. |
| 7301XX - Elbows , 90'' Malleable Cast Iron |
 |
Description : The thread sized are the same for both male and female elbows. |
| 7302XX - Street Elbows , Male & Female 90 '' |
 |
Description : Unit Per Pc. |
| 7303XX - Tees Malleable Cast Iron |
 |
Description : Unit Per Pc. |
| 7304XX - Crosses Malleable Cast Iron |
 |
Description : Unit Per Pc. Material: Malleable iron / cast iron |
| 7305XX - Sockets Malleable Cast Iron |
 |
Description : Unit Per Pc. |
| 7305XX - Reducing Sockets Malleable Cast Iron |
 |
Description : Unit Per Pc. If bushes of a dimension different from those below are required , Please specify the necessary data . |
| 7306XX - Hexagon Bushings Malleable Cast Iron |
 |
Description : Unit Per Pc. |
| 7306XX - Square Head Plugs Malleable Cast Iron |
 |
Description : Galvanized or black malleable cast iron lock nuts . // Unit Per Pc. |
| 7306XX - LockNuts Malleable Cast Iron |
 |
Description : Galvanized or black malleable cast iron lock Unions . // Unit Per Pc. |
| 7307XX - Union Malleable Cast Iron |
 |
Description : Galvanized and black carbon steel short nipples . // Unit Per Pc. |
| 7307XX - Short Nipples Carbon steel |
 |
Description : When ordering , specify the required lenght . available from 2 to 6 inches. |
| 7308XX - Long Nipples carbon Steel |
 |
Description : Galvanized and black malleable cast iron flanges . // Unit Per Pc. |
| 7309XX - Flanges Malleable Cast Iron |
 |
Description : Butt - welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low presure steam , water , oil , gas and air . Ends are machine faced and bevelled . Available in galvanized or black (ungalvanized) but usually blaxk ones are supplied unless otherwise specified . Their maximum working pressure is 2.5 MPa (25 kgf/cm2) |
| 7311XX - Steel Butt - Welding Elbows 45° Long Radius for Ordinary Pipe |
 |
Description : Butt - welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low presure steam , water , oil , gas and air . Ends are machine faced and bevelled . Available in galvanized or black (ungalvanized) but usually blaxk ones are supplied unless otherwise specified . Their maximum working pressure is 2.5 MPa (25 kgf/cm2) |
| 7311XX - Steel Butt - Welding Elows 90° Long Raduis For Ordinary Pipes |
 |
Description : Butt - welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low presure steam , water , oil , gas and air . Ends are machine faced and bevelled . Available in galvanized or black (ungalvanized) but usually blaxk ones are supplied unless otherwise specified . Their maximum working pressure is 2.5 MPa (25 kgf/cm2) |
| 7311XX - Steel Butt - welding Return Bends 180 '' Radius for Ordinary Pipe |
 |
Description : Butt - welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low presure steam , water , oil , gas and air . Ends are machine faced and bevelled . Available in galvanized or black (ungalvanized) but usually blaxk ones are supplied unless otherwise specified . Their maximum working pressure is 2.5 MPa (25 kgf/cm2) |
| 7312XX - Steel Butt - Welding Concentric Radius Reducers for Ordinary Pipe |
 |
Description : Butt - welding Pipe Fittings used for the fabrication of ordinary carbon steel pipe (SGP) of comparatively low presure steam , water , oil , gas and air . Ends are machine faced and bevelled . Available in galvanized or black (ungalvanized) but usually blaxk ones are supplied unless otherwise specified . Their maximum working pressure is 2.5 MPa (25 kgf/cm2) |
| 7312XX - Steel Butt-Welding Tees for Ordinary Pipes |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73210X - Brass Threaded Elbows , 45 ° |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 7321XX - Brass Threaded Caps |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73220X -Brass Threaded Reducing Socket |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73221X - Brass Threaded Hexagon Bushings |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73223X - Brass Threaded Square Head Plugs |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73224X - Brass Threaded Lock Nuts |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73226X - Brass Threaded Unions |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73227X - Brass Threaded Short Nipples |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73230X - Brass Threaded Long Nipples |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 73235X - Brass Threaded Hexagon Nipples |
 |
Description : Made from high quality seamless brass tubing for use with the fabrication of copper or brass tubes. The threads conform to the Taper Pipe Threads of JIS B 0203 and the ISO 7/1 . Larger sized fitting and types other than those listed below are also available upon request . |
| 7323XX - Brass Threaded Reducing Hexagon Nipples |
 |
Description : Stainless steel SUS 304 conforms to a working pressure of 10 kgf/cm2 in saturated steam. These fittings have high corrosion and thermal resistance and are mainly used in the petroleum refinery , petrochemical , thermal and nuclear power industries. They are all threaded for use in general servise lines. The threads for these fittings are taper Pipe Thread Standards (JIS B 0203) compliant with ISO 7/1 standards. Other types of fittings , and sizes larger than those listed below are also available upon request. |
| 73250X - Stainless Steel Threaded Elbow 90 |
 |
Description : Stainless steel SUS 304 conforms to a working pressure of 10 kgf/cm2 in saturated steam. These fittings have high corrosion and thermal resistance and are mainly used in the petroleum refinery , petrochemical , thermal and nuclear power industries. They are all threaded for use in general servise lines. The threads for these fittings are taper Pipe Thread Standards (JIS B 0203) compliant with ISO 7/1 standards. Other types of fittings , and sizes larger than those listed below are also available upon request. |
| 73252X - Stainless Steel Threaded Tees |
 |
Description : Stainless steel SUS 304 conforms to a working pressure of 10 kgf/cm2 in saturated steam. These fittings have high corrosion and thermal resistance and are mainly used in the petroleum refinery , petrochemical , thermal and nuclear power industries. They are all threaded for use in general servise lines. The threads for these fittings are taper Pipe Thread Standards (JIS B 0203) compliant with ISO 7/1 standards. Other types of fittings , and sizes larger than those listed below are also available upon request. |
| 73253X - Stainless Steel threaded Round Caps |
 |
Description : Stainless steel SUS 304 conforms to a working pressure of 10 kgf/cm2 in saturated steam. These fittings have high corrosion and thermal resistance and are mainly used in the petroleum refinery , petrochemical , thermal and nuclear power industries. They are all threaded for use in general servise lines. The threads for these fittings are taper Pipe Thread Standards (JIS B 0203) compliant with ISO 7/1 standards. Other types of fittings , and sizes larger than those listed below are also available upon request. |
| 73255X - Stainless Steel threaded Hexagon Caps |
 |
Description : Stainless steel SUS 304 conforms to a working pressure of 10 kgf/cm2 in saturated steam. These fittings have high corrosion and thermal resistance and are mainly used in the petroleum refinery , petrochemical , thermal and nuclear power industries. They are all threaded for use in general servise lines. The threads for these fittings are taper Pipe Thread Standards (JIS B 0203) compliant with ISO 7/1 standards. Other types of fittings , and sizes larger than those listed below are also available upon request. |
| 73256X - Stainless Steel threaded Sockets |
 |
Description : Stainless steel SUS 304 conforms to a working pressure of 10 kgf/cm2 in saturated steam. These fittings have high corrosion and thermal resistance and are mainly used in the petroleum refinery , petrochemical , thermal and nuclear power industries. They are all threaded for use in general servise lines. The threads for these fittings are taper Pipe Thread Standards (JIS B 0203) compliant with ISO 7/1 standards. Other types of fittings , and sizes larger than those listed below are also available upon request. |
| 73258X - Stainless Steel threaded Hexagon Bushing |
 |
Description : Stainless steel SUS 304 conforms to a working pressure of 10 kgf/cm2 in saturated steam. These fittings have high corrosion and thermal resistance and are mainly used in the petroleum refinery , petrochemical , thermal and nuclear power industries. They are all threaded for use in general servise lines. The threads for these fittings are taper Pipe Thread Standards (JIS B 0203) compliant with ISO 7/1 standards. Other types of fittings , and sizes larger than those listed below are also available upon request. |
| 73263X - Stainless Steel Threaded Round Nipple |
 |
Description : These PVC plastic fittings are used for the fabrication of PVC plastic drian pipes . |
| 73282X - PVC Elbows 90 ° Long Radius for Drian |
 |
Description : These PVC plastic fittings are used for the fabrication of PVC plastic drain pipes . |
| 7328XX - PVC Reducing Y - Pieses , 45 '' for Drain |
 |
Description : These PVC plastic fittings are used for the fabrication of PVC plastic drain pipes . // Unit Per Pc . |
| 73286X - PVC Tees for Drain |
 |
Description : These PVC plastic fittings are used for the fabrication of PVC plastic drain pipes . // Unit Per Pc . |
| 73292X - PVC Sockets for Drain |
 |
Description : Unit Per Pc. |
| 73374X - Brass Flared Elboes , 90 ° |
 |
Description : Unit Per Pc. // Body Nut Sleeve |
| 73402X - Brass Flareless Unions |
 |
Description : Unit Per Pc . // Body , Nut , Sleeve |
| 73406X - Brass Flareless Union Tees |
 |
Description : Unit Per Pc . // Body , Nut , Sleeve |
| 7340XX - Brass Flareless Male Elbows |
 |
Description : These Stainless Steel flareless tube fittings have the following characteristics and specifications . |
| 7343XX - Stainless steel Flareless Male Connectors |
 |
Description : These Stainless Steel flareless tube fittings have the following characteristics and specifications . |
| 73441X - Stainless Steel Flareless Tee Unions |
 |
Description : These Stainless Steel flareless tube fittings have the following characteristics and specifications . // Unit Per Pc. |
| 73442X - Stainless Steel Flareless Elbow Unions |
 |
Description : Many types of flanges are produced according to various standards. The most common types are listed below. |
| 7346XX - SLIP - on Welding Steel Pipe Flanges |
 |
Description : Coupling joints , because of their greater flexibility and economy , are steadily replacing flanged pipe joints in today's plant and marine applications . Unlike flanged joints , couplings not only eliminate the need for costly welding but also compensate for extreme degrees of pipe linear expansion , vobration , and laying deflection . From chemical plants to mammoth tankers , these couplings are utllized extensively throughout plant and marine piping . |
| 73XXXX - Flexible Pipe Couplings |
Pipe & Tube Fittings (73)
